Hike description: The 6-mile Scott Paul Trail (No. 603.1) joins the Park Butte Trail (No. 603) to make a nice loop journey with the high point in the middle of the trip. Heading clockwise, hike two miles on the Park Butte Trail, turning right at the junction and onto the Scott Paul Trail, named in memory of the U.S. Forest Service employee who is credited with the concept and execution of the plans for this trail.

The views on this trail are magnificent and seemingly endless. The trick of this trail is the relatively steep ascent and, going clockwise, the more gentle descent and the water crossings. Depending on the snowmelt and consequent water levels the stream crossings can be easy or boot soakingly tricky.

The Scott Paul Trail is open to hikers only, but horses and llamas are allowed on the Park Butte section of this loop. The high point on this trail is at 5,200 feet. When you get there, take a long break to admire the view before you.

Directions: Follow state Route 20 east from Burlington to milepost 82. Turn left on the Baker Lake Highway. At 12 miles, turn left on Forest Service Road 12. Travel 3.6 miles to the junction of Forest Road 13. Stay to right and follow road for 5.3 milesto the trailhead.

Difficulty rating: 4 (1 is easiest, 5 is most difficult)

Miles round-trip: 8

Elevation: 2,000 feet

Best time of year: July-October

Map: Green Trails 45 Hamilton

Pass: Northwest Forest Pass

Also: There is a privy and camping at the trailhead. Carry the 10 Essentials so that you are prepared for any eventuality. Practice Leave No Trace travel.

Info: Mount Baker Snoqualmie National Forest, Mount Baker Ranger District, Sedro Wooley 360-856-5700; www.fs.fed.us/r6/mbs; “Day Hiking North Cascades,” Mountaineers Books.

Hike of the Week is presented by The Mountaineers Tacoma Branch Hiking/Backpacking Committee.